###########################################################################
First identify the build that is currently running
rpm -q psa
psa-9.2.2-rhel5.build92090714.19
###########################################################################
First identify the build that is currently running
rpm -q psa
psa-9.2.2-rhel5.build92090714.19
###########################################################################
Next call the autoinstaller forcing it to the correct release.
For installing options rather than upgrading there are a lot of
screens that you just hit enter to get the the options menu.
/usr/local/psa/admin/bin/autoinstaller --select-release-id=PLESK_9_2_2
###########################################################################
Welcome to the Parallels Installation and Upgrade Wizard!
===============================================================================
This wizard will guide you through the installation or upgrade process. Before
installing or upgrading Parallels products, be sure to back up your data.
To start the installation or upgrade, press N and then press Enter.
To quit the installer, press Q and then press Enter.
------ IMPORTANT ------
* Before installing or upgrading Parallels products, be sure to back up your data.
* New installation of product(s) should be performed on clean servers only.
Specifically only the operating system with the networking option should be
installed for new installation.
Parallels will not be held liable for damages as a result of installing
product(s) on a server with anything other than a fresh installation of the
operating system for which the product(s) installation was intended.
By using this Wizard you agree to the terms and conditions as described on
http://www.parallels.com/en/company/terms/ and those of the Plesk End Users
License Agreement.
N) Next page; Q) Cancel installing
Select action [N]:
###########################################################################
### Hit enter
###########################################################################
Select product(s) software source
===============================================================================
You can install product(s) in one of the following ways:
* Local Media
* Parallels server
* Other network site
Current settings:
Install product(s) from Parallels server
Install required system packages from Parallels server
Store downloaded files to: /root/parallels
N) Next page; P) Go back; Q) Cancel installing
S) Change source; T) Change target directory;
Select an action and press ENTER [N]:
###########################################################################
### Hit enter
###########################################################################
HTTP Proxy Setup
===============================================================================
If you are behind a firewall and use a HTTP proxy, you should specify the proxy server below.
If your proxy requires authentication, select "Use authentication"
and specify the username and password
Current settings:
Do not use proxy.
N) Next page; P) Go back; Q) Cancel installing;
S) Select proxy server; A) Use authentication;
Select the required action [N]:
###########################################################################
### Hit enter, and wait for the downloads
###########################################################################
Checking for installed packages...
Downloading the file products.inf3: 100% done.
Downloading the file plesk.inf3: 11%..21%..31%..41%..51%..60%..70%..80%..90%..100% done.
Downloading the file sitebuilder.inf3: 15%..35%..55%..75%..96%..100% done.
Downloading the file sso.inf3: 10%..24%..37%..51%..64%..78%..91%..100% done.
###########################################################################
Select the desired products and their versions
===============================================================================
The following product versions are available:
1. [*] Plesk Control Panel
2. (*) Parallels Plesk Panel 9.2.2 (currently installed)
3. [ ] Sitebuilder
4. [ ] SSO
N) Go to the next page; P) Go the previous page; Q) Cancel installing
To select a version, type the respective number;
Select action [N]:
###########################################################################
### Hit enter and wait a few moments for more downloads. You will get some scrolling and finaly will take you to the options menu.
###########################################################################
Downloading the file PSA_9.2.2/plesk-9.2.2-rhel5-i386.inf3: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Detecting installed product components.
###########################################################################
Main components list for Plesk Control Panel
===============================================================================
0 of 44 components selected
Please select the components of Plesk Control Panel you want to install:
1. [=] Base packages of Plesk
2. [=] Plesk Updater
3. [=] PHP5 support
4. [=] PostgreSQL server support
5. [ ] Application vault packages
6. [ ] Plesk Professional Web Site Editor
7. [=] Plesk API [former Plesk Agent]
8. [ ] Plesk migration manager
9. [ ] SiteBuilder publishing support for Plesk
10. [ ] SiteBuilder module migration suite
11. [ ] ColdFusion support for Plesk
12. [ ] MIVA Empresa support
13. [ ] Plesk billing
14. [.] <+> Plesk hosting features // 1 of 5 components selected
Different mailservers
15. (=) Qmail mailserver
16. ( ) Postfix mailserver
17. [ ] <+> Additional Plesk modules // 0 of 5 components selected
18. [ ] <+> Game servers // 0 of 3 components selected
19. [.] <+> Addition mail services // 2 of 4 components selected
20. [ ] <+> Server backup solutions // 0 of 2 components selected
21. [.] <+> Additional language packs // 8 of 9 components selected
22. [ ] <+> Plesk webmails support // 0 of 2 components selected
N) Next page; P) Go back; Q) Cancel installing;
A) Select all; D) Deselect all;
Enter number to toggle the component or to overview the group;
Type a number or a character of desired action [N]:
###########################################################################
### Type in "22" to select "Plesk webmails support" and hit enter
###########################################################################
Primary components list / webmails
===============================================================================
Select the components you want to install:
1. [ ] Horde webmail support
2. [ ] AtMail webmail support
(A) Select all, (D) Deselect all,
(L) Back to primary components list, (Q) Cancel installing
To select or deselect a component, enter its number;
Type a number or a character of desired action [L]:
###########################################################################
### Type in "1" and hit enter to select Horde and then hit enter to return to previous menu.
###
### At the previous menu hit enter to continue with the changes. More scolling as the packages are found and downloaded.
###########################################################################
Enter number to toggle the component or to overview the group;
Type a number or a character of desired action [N]:
Retrieving information about the installed packages...
Downloading the file PSA_9.2.2/update-rpm-RedHat-el5-i386/update-9.2.2-rhel5-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/build-9.2.2-rhel5-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/thirdparty-rpm-RedHat-el5-i386/thirdparty-9.2.2-rhel5-i386.hdr.gz: 11%..20%..32%..41%..50%..61%..70%..82%..91%..100% done.
Determining the packages that need to be installed.
###########################################################################
Determining the amount of free disk space
===============================================================================
Product(s) and operating system packages will be downloaded and saved to the
directory '/root/parallels'.
Required disk space: 14.69 Mb.
Available disk space: 119086.83 Mb.
N) Next page; P) Go back; Q) Cancel installing
Select action [N]:
###########################################################################
### Verify changes and hit enter.
###########################################################################
Preparing Your System for Product Installation
===============================================================================
There are 1 packages required for product to function properly, which
were not found in your system.
There are 0 packages that need to be upgraded
in order to install the product.
N) Install packages;
S) Show a list of packages; L) Back to primary components list;
Q) Cancel installing;
Select action [N]:
###########################################################################
### Last chance verify changes and hit enter. You will get more scroll from
### downloading and installing. Just look for "The packages were installed
### successfully." at the last line.
###########################################################################
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-horde-3.1.7-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-imp-4.1.6-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-ingo-1.1.5-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-kronolith-2.1.8-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-mimp-1.0.2-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-mnemo-2.1.2-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-passwd-3.0.1-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/dist-rpm-RedHat-el5-i386/opt/horde/psa-turba-2.1.7-rhel5.build92090714.19.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.2.2/thirdparty-rpm-RedHat-el5-i386/../dist-rpm-RedHat-el5-i386/contrib/psa-pear-1.4.9-20060517.1.noarch.rpm: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Starting installation of packages
Installing the package psa-pear-1.4.9-20060517.1.noarch (t 0xaa2cfb8 source=0x9445968 P:537 R:0)
Installing the package psa-horde-3.1.7-rhel5.build92090714.19.noarch (b 0xaa0e088 source=0x94457a0 P:2207 R:6)
Trying to start service mysqld... done
Trying to establish test connection... connected
done
Trying to generate random password for Horde Web Based mail client... Trying to install horde database... done
Installing the package psa-imp-4.1.6-rhel5.build92090714.19.noarch (b 0xaa285d8 source=0x94457a0 P:528 R:4)
Trying to start service mysqld... done
Trying to establish test connection... connected
done
Trying to restart service httpd... httpd (pid 28230 23673 23672 23671 23670 23669 23668 23667 23666 23665) is running...
Stopping httpd: [ OK ]
Starting httpd: [ OK ]
done
Installing the package psa-ingo-1.1.5-rhel5.build92090714.19.noarch (b 0xaa02e20 source=0x94457a0 P:203 R:1)
Installing the package psa-kronolith-2.1.8-rhel5.build92090714.19.noarch (b 0xaa03ca8 source=0x94457a0 P:323 R:4)
Trying to start service mysqld... done
Trying to establish test connection... connected
done
Trying to install kronolith database... done
Installing the package psa-mimp-1.0.2-rhel5.build92090714.19.noarch (b 0xaa04880 source=0x94457a0 P:122 R:1)
Installing the package psa-mnemo-2.1.2-rhel5.build92090714.19.noarch (b 0xaa01fa0 source=0x94457a0 P:187 R:3)
Trying to start service mysqld... done
Trying to establish test connection... connected
done
Trying to install mnemo database... done
Installing the package psa-passwd-3.0.1-rhel5.build92090714.19.noarch (b 0xa93daf8 source=0x94457a0 P:154 R:1)
Installing the package psa-turba-2.1.7-rhel5.build92090714.19.noarch (b 0xa939500 source=0x94457a0 P:265 R:
Trying to start service mysqld... done
Trying to establish test connection... connected
done
Trying to install turba database... done
The packages were installed successfully.
###########################################################################